Domestic Presser Feet Buttonhole Sensormatic for PFAFF

The Sensormatic Buttonhole Foot provides the perfect buttonhole; it will have both sides of the buttonhole sewn in the same direction for a even result.

1. Mark on the fabric where you want the buttonhole to begin.
2. Measure the button, taking care to add extra length for domed or novelty styles.
3. Select an automatic buttonhole stitch appropriate for the task.  Change the settings to account for the button length and density needed.
4. Snap on the buttonhole foot, and plug the jack into the black socket near the LED lights.
   
5. Place the fabric under the presser foot and align the little red triangle with the notch guide.
   
6. Lower the needle into the starting point using the handwheel.
   
7. Start to sew. The machine will stitch the full buttonhole sequence and stop automatically.
   
8. Remove the fabric and trim threads. Insert a pin at each bartack and cut the buttonhole open with a seam ripper.
   

Tips for Success:

• Always test on a scrap of your project fabric first.  This will help determine placement and whether extra stabilizer is needed.
• Do not stop sewing until the machine stops automatically; if interrupted , it will need to be reset both physically and by pressing the stitch restart button. 
• Try not to move or fuss as the machine is sewing, this leads to uneven results.  The only job of the sewist is to supervise and make sure the bulk of the garment doesn't pull or warp the easy movement of the machine.