Domestic Presser Feet Rolled Hem for PFAFF

Hemming prevents the edges from fraying and results in a clean, durable edge.

With the Rolled Hem Foot, you can hem light to medium weight fabrics for clothing and home decorating items without having to pre-iron the fabric edges.

How to utilise:

1. Select a straight stitch
2. Snap on the Rolled Hem Foot and engage IDT™ system (if available on your machine).
3. If needed, press only the beginning of the hem to 2, 3 or 4 mm wide, depending on the size of your foot.
4. Place the fabric flat in the groove under the foot and sew a few stitches.
5. Lower the needle into the fabric to hold it in place. Raise the presser foot and pull the cut edge of the fabric into the scroll of the hemmer, using a sharp point if necessary.
6. Lower the foot and continue sewing while holding the cut edge up in front of the foot.

• Do not allow fabric to run under the right half of the presser foot.
• If scraps are available, test the hemmer foot to make sure the result is acceptable. This also aids in aiming how far around the curl to allow the fabric as the machine sews.
• Hem crisp fabrics with a straight stitch. Hem soft fabrics with a zigzag that just encases the mm size of the hem. (Sharply curved areas are not suitable for this type hemmer.)